Packaged Pumping Stations UK

Advice And Support From A Professional Company That Has Installed And Maintained Literally Hundreds Of Pumping Stations

When your drainage scheme calls for a wastewater lifting station, you need a fast, efficient solution that meets current regulations, such as BSEN 12050 or BSEN 752-6, and won't cost the earth.

To comply with BSEN 12050 your pumping station should:

  • Include a chamber constructed of polypropylene, polyethylene, concrete or glass reinforced plastic (not glass loaded resin).
  • Have internal pipework made of steel, ABS plastic or Hi-Impact PVC (not uPVC).
  • Incorporate a ball type non-return valve (with nitrile coated steel ball) as opposed to a swing check valve.
  • Have rigid anchor feet under the chamber.
  • Undergo appropriate testing and carry a CE mark.

Your Pumptec Packaged Pumping Station has all of the above and utilises single, dual and tri-laminated (an exclusive plastic and glass encapsulation process) rigid one-piece tanks across the range.

This makes them a commercially beneficial alternative to installing an adoptable scheme with many of the features available over and above the standard PPS specification, such as:

  • Separate polyethylene valve chamber.
  • Heavy-duty access covers.
  • Integral over-pumping facility.
  • Multi-compartment control panel.
  • Ultrasonic level control in lieu of floatswitches.
  • Telemetry/dial-out alarms.
  • Remote monitoring of wastewater lift stations.

In addition virtually any make or type of submersible pump can be fitted into your Pumptec Packaged Pumping Station. So, if your preference is for Caprari, Flygt, ABS, KSB, Hydrostal, Robot, Grundfos, or whatever, it can be accommodated.

Similarly single and double channel, vortex or macerator pumps will be supplied dependent on application parameters and site requirements.

The Pumptec PPS Range consists of a single pump sump and backup pump systems as follows:

General Specifications

1000 SERIES

Packaged Pumping StationTank Dimensions:1.0m diameter up to 2.5m deep
Output:3 litres/second max
Storage1500 litres max
Minimum Volume:130 litres
Pumps:Single
Inlet2 x 110 OSMA sockets
Outlet:2 inch bsp/50mm diameter max

1250 SERIES

Packaged Pumping StationTank Dimensions:1.25m dia. up to 4.5m deep
Output:5 litres/second max
Storage5000 litres max
Minimum Volume:300 litres
Pumps:Single/twin
Inlet4 x 110 OSMA sockets
Outlet:2 inch bsp/50mm diameter max

1700 SERIES

Packaged Pumping StationTank Dimensions:1.7m diameter up to 3.5m deep
Output:30 litres/second max
Storage7000 litres max
Minimum Volume:1500 litres
Pumps:Twin
Inlet3 x 160 OSMA sockets
Outlet:100mm diameter max

2200 SERIES

Packaged Pumping StationTank Dimensions:2.2m diameter up to 3.5m deep
Output:150 litres/second max
Storage12000 litres max
Minimum Volume:2500 litres
Pumps:Twin
InletTo suit
Outlet:300mm diameter max